Profile Details

Create Project

★★★★★

☆☆☆☆☆

USD 60 /hr

★★★★★

☆☆☆☆☆

Hire Dr. Barnik S.

India

USD 60 /hr

Mechanical Engineering Research Expert | Materials Science | Scientific Writing | AI & Manufacturing SME

Profile Summary

I am a Mechanical Engineering Subject Matter Expert, researcher, and Associate Professor with over 20 years of experience in higher education, scientific research, technical consulting, and academic leadership. My expertise spans Mechanical Engineering, Manufacturing Engineering, Materials Science, Friction Stir Welding (FSW), Friction Stir Processing (FSP), Metal Matrix Composites, Sustainable Manufacturing, Artificial Intelligence in Manufacturing, and Engineering Education. Throughout my academic career, I have supervised undergraduate, postgraduate, and doctoral research, published extensively in reputed international journals, reviewed manuscripts for leading SCI-indexed journals, and contributed to curriculum development, research planning, and academic quality assurance. I have also served in several academic and administrative leadership roles, providing valuable experience in project management, technical evaluation, policy implementation, and interdisciplinary collaboration. My research focuses on advanced manufacturing processes, joining technologies, materials characterization, lightweight structural materials, AI-assisted manufacturing, process optimization, and sustainable engineering solutions. I have actively contributed to the development of research proposals, experimental design, data interpretation, scientific writing, and peer review for high-impact publications. I provide professional services in: • Scientific and technical writing • Journal manuscript review and editing • PhD and Master's thesis review and improvement • Research proposal development (ANRF, DST, SERB, NSF, Horizon Europe and similar funding agencies) • Mechanical Engineering and Materials Science consulting • AI training and evaluation for engineering and scientific content • Technical documentation and literature review • Experimental design, research methodology, and statistical interpretation • Curriculum development and academic content creation • Peer-review style technical assessment of research papers I am committed to delivering technically rigorous, well-structured, publication-quality work while maintaining high standards of scientific integrity, clarity, and accuracy. Whether you require expert evaluation of engineering content, assistance in preparing high-quality research publications, guidance on complex technical problems, or AI-assisted scientific content validation, I bring a combination of deep domain expertise, analytical thinking, and meticulous attention to detail. I look forward to collaborating with researchers, universities, industries, startups, and AI organizations seeking reliable, evidence-based, and technically sound engineering expertise.

Subject Matter Expertise

• ☆ Materials Science & Engineering
• ☆ Metallurgy
• ☆ Powder Metallurgy
• ☆ Mechanical Engineering
• ☆ Mechanical Design
• ☆ Industrial Engineering
• ☆ Manufacturing
• ☆ Manufacturing Facility Design
• ☆ Continuous Process Manufacturing
• ☆ Lean Manufacturing
• ☆ Manufacturing Optimization
• ☆ Automation
• ☆ Manufacturing Automation
• ☆ Device Fabrication
• ☆ Welding & Joining
• ☆ Product Design
• ☆ Design for Manufacturing
• ☆ 3D Printing/Additive Manufacturing

Services

• Writing
• Research
• Consulting
• Data & AI
• Product Development

Writing Technical Writing

Research Feasibility Study, Technology Scouting, Fact Checking, Gray Literature Search, Scientific and Technical Research

Consulting Scientific and Technical Consulting

Data & AI Predictive Modeling, Statistical Analysis

Product Development Material Sourcing, Manufacturing

Work Experience

ASSOCIATE PROFESSOR

National Institute of Technology Agartala

February 2024 - Present

Assistant Professor and Faculty

National Institute of Technology Agartala

March 2006 - Present

ASSOCIATE PROFESSOR

National Institute of Technology Agartala

March 2006 - Present

Education

Ph.D (MECHANICAL ENGG. DEPT)

National Institute of Technology Agartala

- Present

Certifications

• Certification details not provided.

Publications

JOURNAL ARTICLE

Das, Debraj, Kumar, Sanjeev, Katiyar, Jitendra Kumar, Roy, Barnik Saha(2026). Effect of Process Parameters on Force, Torque, Surface Morphology, and Hardness of Friction Stir-Welded AA2024 Alloy Plates. Journal of Materials Engineering and Performance. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 1--12. Springer US New York

Acharya, Uttam, Choudhury, Smrity, Sethi, Durjyodhan, Roy, Barnik Saha, Thirugnanasambandam, Arunkumar(2026). Thermal dynamics and torque-force interplay in friction stir welding of advanced aluminium composites. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 240. (3). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 436--453. SAGE Publications Sage UK: London, England

Saha, Ranamay, Das, Debraj, Manoharan, Kapil, Roy, Barnik Saha, Biswas, Pankaj(2026). Thermomechanical Analysis and Experimental Investigation of Zr Nanoparticles Reinforced Friction Stir Welding of AA2024-T3 Alloy. Journal of Materials Engineering and Performance. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 1--20. Springer US

Das, Debraj, Mitra, Jhuma, Khan, Shahanwaz, Roy, Barnik Saha(2025). A comparative experimental study on metal active gas welding process at low temperature and room temperature. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 09544089251364577. SAGE Publications Sage UK: London, England

Medhi, Tanmoy, Choudhury, Smrity, Biswas, Pankaj, Thirugnanasambandam, Arunkumar, Roy, Barnik Saha(2025). Effect of Heat Input on the Microstructure Evolution and Mechanical Properties of Friction Stir Welded Aluminum-Copper Joints. Journal of Materials Engineering and Performance. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 1--18. Springer US New York

Das, Rahul, Choudhury, Smrity, Sethi, Durjyodhan, Medhi, Tanmoy, Roy, Barnik Saha(2025). Enhanced corrosion resistance and mechanical behavior in AA2024-T3 alloy composite via friction stir processing with Zn incorporation. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 239. (6). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 3738--3754. SAGE Publications Sage UK: London, England

Choudhury, Smrity, Thirugnanasambandam, Arunkumar, Payak, Viresh, Medhi, Tanmoy, Saha Roy, Barnik(2025). Fabrication of three-layered aluminium-copper laminated composites using friction stir additive manufacturing. Physica Scripta. 100. (2). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 025011. IOP Publishing

Das, Debraj, Choudhury, Smrity, Das, Rahul, Saha, Subhash Chandra, Roy, Barnik Saha(2025). Investigating the synergistic effects of Zr-reinforcement on the mechanical and corrosion properties of AA2024 alloy. Materials Science and Technology. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 02670836251343673. SAGE Publications Sage UK: London, England

Payak, Viresh, Paulraj, Jawahar, Roy, Barnik Saha, Choudhury, Smrity, Das, Rahul(2025). Microstructural and micro-hardness analysis of friction stir-welded AA6101/C11000 dissimilar joints with a hybrid interlayer. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 09544089241308127. SAGE Publications Sage UK: London, England

Medhi, Tanmoy, Acharya, Uttam, Choudhury, Smrity, Das, Pankaj Kr, Akinlabi, Esther, Roy, Barnik S(2025). Prediction of coefficient of friction in friction stir welding and its implementation in a thermo-mechanical model. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 09544089251338944. SAGE Publications Sage UK: London, England

Das, Debraj, Mitra, Jhuma, Saha, Subash Chandra, Roy, Barnik Saha(2025). TIG welding process on IS 2062A steel of 5 mm plate, utilizing a 2.5 mm diameter tungsten solid wire as electrode along with direct current straight polarity and argon inert gas was employed for shielding purpose. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 09544089241311791. SAGE Publications Sage UK: London, England

Acharya, Uttam, Choudhury, Smrity, Sethi, Durjyodhan, Akinlabi, Esther, Saxena, Kuldeep K, Roy, Barnik Saha(2024). A comprehensive investigation on various welding facets for FSW of advanced structural AMC.

Payak, Viresh, Paulraj, Jawahar, Roy, Barnik Saha, Choudhury, Smrity, Das, Rahul(2024). A parametric study of interlayer incorporated friction stir welded Al/Cu and its effect on microstructure and mechanical properties: PARAMETRIC STUDY OF FS WED AL/CU JOINTS WITH INTERLAYER. Indian Journal of Engineering and Materials Sciences (IJEMS). 31. (5). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 699--713.

Payak, Viresh, Paulraj, Jawahar, Roy, Barnik Saha, Bhargava, Manish, Das, Pritam(2024). A review on recent development in aluminium-copper friction stir welding. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 238. (3). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 1462--1506. SAGE Publications Sage UK: London, England

Kumar, Sudhir, Roy, Barnik Saha(2024). Effect of different tool pin geometries on force, torque, microstructure and mechanical properties of friction stir welded acrylonitrile butadiene styrene and polycarbonate joints. International Journal on Interactive Design and Manufacturing (IJIDeM). 18. (9). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 6897--6908. Springer Paris Paris

Acharya, Uttam, Banik, Abhijit, Mwema, Fredrick, Akinlabi, Stephen, Akinlabi, Esther, Roy, Barnik Saha(2024). Effect of tool traverse speed on high strength structural AA6092/17.5 SiCp-T6 AMC friction stir welding. Materials Today Communications. 38. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 108040. Elsevier

Suman, Setu, Sethi, Durjyodhan, Acharya, Uttam, Roy, Barnik Saha(2024). Exploring the influence of SiC particles on temperature variations, microstructural evolution, and mechanical characteristics in the friction stir processing of AA6061-T6 plates. Silicon. 16. (5). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 2219--2231. Springer Netherlands Dordrecht

Choudhury, Smrity, Roy, Manisha, Payak, Viresh, Acharya, Uttam, Omoniyi, Peter, Akinlabi, Stephen, Akinlabi, Esther, Saha Roy, Barnik(2024). Producing multilayer laminated composite of aluminium/copper by friction stir additive manufacturing process. Advances in Materials and Processing Technologies. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 1--20. Taylor \& Francis

Choudhury, Smrity, Acharya, Uttam, Sethi, Durjyodhan, Roy, Joydeep, Roy, Barnik Saha(2024). Synergic enhancement of ductility and toughness in friction stir additively fabricated AA6061-T6 build. Journal of Adhesion Science and Technology. 38. (16). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 3092--3118. Taylor \& Francis

Smrity Choudhury, Rahul Das, Durjyodhan Sethi, Joydeep Roy, Barnik Saha Roy (2023). Critical Assessment 43: Microstructural and mechanical properties of friction stir additively fabricated SiC-Reinforced AA6061 build . Materials Science and Technology.

Acharya, Uttam, Kumar, Uday, Ghosh, Moupiya, Choudhury, Smrity, Srivastava, Ashok Kumar, Roy, Barnik Saha(2023). An experimental approach for achieving high strength dissimilar aluminium-magnesium joints: Application of tool pin profiles on different joint configurations. CIRP Journal of Manufacturing Science and Technology. 45. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 49--60. Elsevier

Choudhury, Smrity, Das, Rahul, Sethi, Durjyodhan, Roy, Joydeep, Roy, Barnik Saha(2023). Critical assessment 43: microstructural and mechanical properties of friction stir additively fabricated SiC-reinforced AA6061 build. Materials Science and Technology. 39. (18). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 3090--3110. SAGE Publications Sage UK: London, England

Samal, Ankit, Kumar, Sanjeev, Bhargava, Manish, Roy, Barnik Saha (2023). Fabrication and Characterization of Banana Pseudostem Fibre Reinforced Epoxy Hybrid Composite Using Al2O3 as Filler . Journal of Bionic Engineering.

Samal, Ankit, Kumar, Sanjeev, Bhargava, Manish, Roy, Barnik Saha(2023). Fabrication and characterization of banana pseudostem fibre reinforced epoxy hybrid composite using Al2O3 as filler. Journal of Bionic Engineering. 20. (4). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 1737--1746. Springer Nature Singapore Singapore

Kumar, Sanjeev, Soni, Ashish, Katiyar, Jitendra Kumar, Kumar, Sachin, Roy, Barnik Saha(2023). Influence of tool pin profiles on waviness and natural frequency during friction stir welding of Al-Li alloys plates. Surface Topography: Metrology and Properties. 11. (2). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 025015. IOP Publishing

Kumar, Sanjeev, Katiyar, Jitendra Kumar, Roy, Barnik Saha (2023). Influence of tool tilt angle on physical, thermal, and mechanical properties of friction stir welded Al-Cu-Li alloys . Materials Today Communications.

Kumar, Sanjeev, Katiyar, Jitendra Kumar, Roy, Barnik Saha(2023). Influence of tool tilt angle on physical, thermal, and mechanical properties of friction stir welded Al-Cu-Li alloys. Materials Today Communications. 34. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 105348. Elsevier

Suman, Setu, Sethi, Durjyodhan, Bhargava, Manish, Roy, Barnik Saha (2023). Investigating the Effect of Multi-pass Friction Stir Processing of SiC Particles on Temperature Distribution, Microstructure and Mechanical Properties of AA6061-T6 Plate . Silicon.

Kumar, Sanjeev, Katiyar, Jitendra Kumar, Kesharwani, Guru Sewak, Roy, Barnik Saha(2023). Microstructure, mechanical, and force-torque generation properties of friction stir welded third generation Al/Li alloy at higher traverse speed. Materials Today Communications. 35. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 106084. Elsevier

Kumar, Sanjeev, Triveni, Manoj Kumar, Katiyar, Jitendra Kumar, Tiwari, Tameshwer Nath, Roy, Barnik Saha(2023). Prediction of heat generation effect on force torque and mechanical properties at varying tool rotational speed in friction stir welding using Artificial Neural Network. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 237. (19). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 4495--4514. SAGE Publications Sage UK: London, England

Choudhury, Smrity, Acharya, Uttam, Roy, Joydeep, Roy, Barnik Saha (2023). Recent progress in solid-state additive manufacturing technique: Friction stir additive manufacturing . Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.

Das, Rahul, Kumar, Sanjeev, Katiyar, Jitendra Kumar, Choudhury, Smrity, Roy, Barnik Saha(2023). State-of-the-art on microstructural, mechanical and tribological properties of friction stir processed aluminium 2xxx series alloy. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 09544089231215223. SAGE Publications Sage UK: London, England

Choudhury, Smrity, Acharya, Uttam, Roy, Joydeep, Roy, Barnik Saha(2023). Recent progress in solid-state additive manufacturing technique: Friction stir additive manufacturing. Proceedings of the Institution of mechanical engineers, part E: Journal of process mechanical engineering. 237. (2). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 467--491. SAGE Publications Sage UK: London, England

Kumar, Sanjeev, Triveni, Manoj Kumar, Katiyar, Jitendra Kumar, Tiwari, Tameshwer Nath, Roy, Barnik Saha (2023). Prediction of heat generation effect on force torque and mechanical properties at varying tool rotational speed in friction stir welding using Artificial Neural Network . Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.

Viresh Payak, Jawahar Paulraj, Barnik Saha Roy, Manish Bhargava, Smrity Choudhury(2023). Microstructural and mechanical characteristics of friction stir welded Al6101/C11000 joints with zinc and silver interlayer. The International Journal of Advanced Manufacturing Technology. doi.org/10.1007/s00170-023-11839-7

Suman, Setu, Sethi, Durjyodhan, Bhargava, Manish, Roy, Barnik Saha(2023). Investigating the effect of multi-pass friction stir processing of SiC particles on temperature distribution, microstructure and mechanical properties of AA6061-T6 plate. Silicon. 15. (4). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 1621--1633. Springer Netherlands Dordrecht

Kumar, Sudhir, Roy, Barnik Saha (2022). A comparative analysis on friction stir welding of similar and dissimilar polymers: acrylonitrile butadiene styrene and polycarbonate plates . Welding in the World.

Sudhir Kumar, Barnik Saha Roy(2022). A comparative analysis on friction stir welding of similar and dissimilar polymers: acrylonitrile butadiene styrene and polycarbonate plates. Welding in the World.

Sethi, Durjyodhan, Acharya, Uttam, Shekhar, Shashank, Roy, Barnik Saha(2022). Applicability of unique scarf joint configuration in friction stir welding of AA6061-T6: analysis of torque, force, microstructure and mechanical properties. Defence Technology. 18. (4). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 567--582. Elsevier

Kumar, Sanjeev, Chaudhary, Smrity, Sethi, Durjyodhan, Paulraj, Jawahar, Bhargava, Manish, Roy, Barnik Saha(2022). Effect of process parameters on third generation of friction stir welded Al--Li alloy plates. CIRP Journal of Manufacturing Science and Technology. 38. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 372--385. Elsevier

Kumar, Sanjeev, Chaudhary, Smrity, Sethi, Durjyodhan, Paulraj, Jawahar, Bhargava, Manish, Roy, Barnik Saha (2022). Effect of process parameters on third generation of friction stir welded Al-Li alloy plates . CIRP Journal of Manufacturing Science and Technology.

Sethi, Durjyodhan, Acharya, Uttam, Kumar, Sanjeev, Shekhar, Shashank, Roy, Barnik Saha(2022). Effect of reinforcement particles on friction stir welded joints with scarf configuration: an approach to achieve high strength joints. Silicon. 14. (12). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 6847--6860. Springer Netherlands Dordrecht

Sethi, Durjyodhan, Acharya, Uttam, Kumar, Sanjeev, Shekhar, Shashank, Roy, Barnik Saha (2022). Effect of tool rotational speed on friction stir welded AA6061-T6 scarf joint configuration . Advanced Composites and Hybrid Materials.

KUMAR, SANJEEV, SETHI, DURJYODHAN, CHOUDHURY, SMRITY, DAS, RAHUL, SAHA, SUBHASH CHANDRA, ROY, BARNIK SAHA(2022). Effect of tool pin profiles on surface roughness of friction stir welded 2050-T84 Al-Cu-Li alloys. Journal of Mines, Metals & Fuels. 70.

Setu Suman, Durjyodhan Sethi, Arabinda Meher, Manish Bhargava, Barnik Saha Roy (2022). Effect of tool rotational speed on microstructure and mechanical properties of AA6061/SiC surface composites using friction stir processing . Materials Today: Proceedings.

Kumar, S., Roy, B.S.(2022). Force and Torque Perspective and Their Effects on the Mechanical and Microstructural Characteristics of Dissimilar Friction Stir Welded Acrylonitrile Butadiene Styrene and Polycarbonate Plates . Transactions of the Indian Institute of Metals.

Sethi, Durjyodhan, Kumar, Sanjeev, Shekhar, Shashank, Roy, Barnik Saha(2022). Friction stir welding of AA7075-T6/TiB2 in situ cast composites plates using scarf joint configuration. Advances in Materials and Processing Technologies. 8. (sup2). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 979--991. Taylor \& Francis

Kumar, Sanjeev, Katiyar, Jitendra Kumar, Acharya, Uttam, Saha, Subash Chandra, Roy, Barnik Saha (2022). Influence of tool rotational speed on Microstructure and Mechanical Properties of Al-Li Alloy using Friction Stir Welding . Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.

Kumar, Sanjeev, Katiyar, Jitendra Kumar, Acharya, Uttam, Saha, Subash Chandra, Roy, Barnik Saha(2022). Influence of tool rotational speed on microstructure and mechanical properties of Al-Li alloy using friction stir welding. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 236. (5). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 2106--2117. SAGE Publications Sage UK: London, England

VIRESH PAYAK, Jawahar P, Barnik Saha Roy, Manish Bhargava, Smrity Choudhury (2022). Microstructural and Mechanical Characteristics of Friction Stir Welded Al6101/C11000 Joints with Zinc and Silver Interlayer . Research Square.

Kumar Patel, S., Pratap Singh, V., Kumar, D., Saha Roy, B., Kuriachen, B.(2022). Microstructural, mechanical and wear behavior of A7075 surface composite reinforced with WC nanoparticle through friction stir processing . Materials Science and Engineering B: Solid-State Materials for Advanced Technology. 276.

Patel, Surendra Kumar, Singh, Virendra Pratap, Kumar, Deepak, Roy, Barnik Saha, Kuriachen, Basil(2022). Microstructural, mechanical and wear behavior of A7075 surface composite reinforced with WC nanoparticle through friction stir processing. Materials Science and Engineering: B. 276. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 115476. Elsevier

Kumar, Sanjeev, Chaubey, Sujeet Kumar, Sethi, Durjyodhan, Saha, Subhash Chandra, Roy, Barnik Saha(2022). Performance analysis of varying tool pin profile on friction stir welded 2050-T84Al-Cu-Li alloy plates. Journal of Materials Engineering and Performance. 31. (3). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 2074--2085. Springer US New York

Kumar, Uday, Acharya, Uttam, Roy, Barnik Saha (2022). Study of modified joint configuration in friction stir welding of dissimilar Al-Mg plates . International Journal of Materials and Product Technology.

Kumar, Uday, Acharya, Uttam, Roy, Barnik Saha(2022). Study of modified joint configuration in friction stir welding of dissimilar Al-Mg plates. International Journal of Materials and Product Technology. 64. (3-4). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 307--324. Inderscience Publishers (IEL)

Durjyodhan Sethi, Uttam Acharya, Tanmoy Medhi, Shashank Shekhar, Barnik Saha Roy(2021). "Microstructural and mechanical property of friction stir welded Al7075/TiB2 aluminium matrix composite". Materials Today: Proceedings doi.org/10.1016/j.matpr.2020.01.198.

Kumar, Devender, Ottarackal, Denny J, Acharya, Uttam, Medhi, Tanmoy, Roy, Barnik Saha, Saha, Subhash Chandra(2021). A parametric study of friction stir welded AA6061/SiC AMC and its effect on microstructure and mechanical properties. Materials Today: Proceedings. Elsevier

Acharya, U., Medhi, T., Sethi, D., Choudhury, S., Banik, A., Saha, S.C., Roy, B.S.(2021). A study on the implication of modified joint configuration in friction stir welding . Soldagem e Inspecao. 26. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString NA.

Acharya, Uttam, Medhi, Tanmoy, Sethi, Durjyodhan, Choudhury, Smrity, Banik, Abhijit, Saha, Subhash Chandra, Roy, Barnik Saha(2021). A study on the implication of modified joint configuration in friction stir welding. Soldagem & Inspeção. 26. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString e2606. Associa{\c{c}}{\~a}o Brasileira de Soldagem

Medhi, T., Hussain, S.A.I., Roy, B.S., Saha, S.C.(2021). An intelligent multi-objective framework for optimizing friction-stir welding process parameters . Applied Soft Computing. 104.

Medhi, Tanmoy, Hussain, Syed Abou Iltaf, Roy, Barnik Saha, Saha, Subhash Chandra(2021). An intelligent multi-objective framework for optimizing friction-stir welding process parameters. Applied Soft Computing. 104. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 107190. Elsevier

Sethi, D., Acharya, U., Shekhar, S., Roy, B.S.(2021). Applicability of unique scarf joint configuration in friction stir welding of AA6061-T6: Analysis of torque, force, microstructure and mechanical properties . Defence Technology.

Das, S., Acharya, U., Rao, S.V.V.N.S., Paul, S., Roy, B.S.(2021). Assessment of the surface characteristics of aerospace grade AA6092/17.5 SiCp-T6 composite processed through EDM . CIRP Journal of Manufacturing Science and Technology. 33. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 123-132.

Shirsendu Das, Uttam Acharya, S.V.V.N. Siva Rao, Swarup Paul, Barnik Saha Roy(2021). Assessment of the surface characteristics of aerospace grade AA6092/17.5 SiCp-T6 composite processed through EDM. CIRP Journal of Manufacturing Science and Technology. 33. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 123--132.

Acharya, U., Yadava, M.K., Banik, A., Saha, S.C., Saha Roy, B.(2021). Effect of Heat Input on Microstructure and Mechanical Properties of Friction Stir Welded AA6092/17.5 SiCp-T6 . Journal of Materials Engineering and Performance. 30. (12). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 8936-8946.

Uttam Acharya , Manasij Kumar Yadava, Abhijit Banik, Subhash Chandra Saha,, Barnik Saha Roy(2021). Effect of Heat Input on Microstructure and Mechanical Properties of Friction Stir Welded AA6092/17.5 SiCp-T6. Journal of Materials Engineering and Performance.

Sethi, D., Acharya, U., Kumar, S., Shekhar, S., Roy, B.S.(2021). Effect of Reinforcement Particles on Friction Stir Welded Joints with Scarf Configuration: an Approach to Achieve High Strength Joints . Silicon.

Sethi, D., Kumar, S., Shekhar, S., Roy, B.S.(2021). Friction stir welding of AA7075-T6/TiB₂ in situ cast composites plates using scarf joint configuration . Advances in Materials and Processing Technologies.

Kumar, Sudhir, Daniel, James D Jafrey, Roy, Barnik Saha(2021). Friction stir welding of glass filled Nylon 6 composite sheets using double step shoulder tool. Materials Today: Proceedings. 44. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 2511--2516. Elsevier

Saju, T.P., Narayanan, R.G., Roy, B.S.(2021). Joining dissimilar grade aluminum alloy sheets using multi-hole dieless friction stir riveting process . International Journal of Advanced Manufacturing Technology. 112. (1-2). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 285-302.

Saju, Tinu P, Narayanan, R Ganesh, Roy, Barnik Saha(2021). Joining dissimilar grade aluminum alloy sheets using multi-hole dieless friction stir riveting process. The International Journal of Advanced Manufacturing Technology. 112. (1). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 285--302. Springer London London

Kumar Patel, Surendra, Pratap Singh, Virendra, Roy, Barnik Saha, Kuriachen., Basil(2021). Microstructural, mechanical and wear behavior of A7075 surface composite reinforced with WC and ZrSiO4 nanoparticle through friction stir processing. Journal of Manufacturing Processes. 71. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 85--105. Elsevier

Patel, S.K., Singh, V.P., Roy, B.S., Kuriachen, B.(2021). Microstructural, mechanical and wear behavior of A7075 surface composite reinforced with WC and ZrSiO₄ nanoparticle through friction stir processing . Journal of Manufacturing Processes. 71. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 85-105.

Acharya, U., Roy, B.S., Saha, S.C.(2021). On the Role of Tool Tilt Angle on Friction Stir Welding of Aluminum Matrix Composites . Silicon. 13. (1). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 79-89.

Acharya, Uttam, Roy, Barnik Saha, Saha, Subhash Chandra(2021). On the role of tool tilt angle on friction stir welding of aluminum matrix composites. Silicon. 13. (1). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 79--89. Springer Netherlands Dordrecht

Kumar, S., Chaubey, S.K., Sethi, D., Saha, S.C., Roy, B.S.(2021). Performance Analysis of Varying Tool Pin Profile on Friction Stir Welded 2050-T84Al-Cu-Li Alloy Plates . Journal of Materials Engineering and Performance.

Choudhury, Tapash, Ghorai, Arijit, Medhi, Tanmoy, Acharya, Uttam, Roy, Barnik Saha, Saha, SC(2021). Study of microstructure and mechanical properties in friction stir welded aluminum copper lap joint. Materials Today: Proceedings. Elsevier

Kumar, Sudhir, James, D Jafrey Daniel, Panneerselvam, K, Roy, Barnik Saha(2021). Tribological studies of glass filled Nylon 6 composites in self--mated contacts and against AISI D2 steel disc. Materials Today: Proceedings. 44. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 1939--1943. Elsevier

Kumar, Uday, Prajapati, Anurag, Acharya, Uttam, Medhi, Tanmoy, Roy, Barnik Saha, Saha, SC(2021). Welding condition & microstructure of friction stir welded AA 6061-T6 and AZ31B. Materials Today: Proceedings. Elsevier

Kumar, Sudhir, Roy, Barnik Saha(2020). A comparative analysis between conventional tool and double-step shoulder tool for joining of acrylonitrile butadiene styrene and polycarbonate plate by using friction stir welding. Materials Today: Proceedings. 26. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 2212--2215. Elsevier

Medhi, T., Roy, B.S., Saha, S.C.(2020). An experimental investigation on the influence of rotational speed on microstructure and mechanical properties of friction stir welded dissimilar Al-Cu joints . International Journal of Materials and Product Technology. 60. (2-4). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 260-273.

Medhi, Tanmoy, Roy, Barnik Saha, Saha, Subhash Chandra(2020). An experimental investigation on the influence of rotational speed on microstructure and mechanical properties of friction stir welded dissimilar Al-Cu joints. International Journal of Materials and Product Technology. 60. (2-4). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 236--259. Inderscience Publishers (IEL)

Kumar, Sanjeev, Sethi, Durjyodhan, Choudhury, Smrity, Roy, Barnik Saha, Saha, SC(2020). An experimental investigation to the influence of traverse speed on microstructure and mechanical properties of friction stir welded AA2050-T84 Al-Cu-Li alloy plates. Materials Today: Proceedings. 26. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 2062--2068. Elsevier

Chatterjee, Soumesh, Anand, Akash, Roy, Biman Kumar Saha, Terzija, Vladimir(2020). Dual use line relays to improve power swing deblocking function. International Journal of Electrical Power & Energy Systems. 121. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 106156. Elsevier

Kumar, Sanjeev, Acharya, Uttam, Sethi, Durjyodhan, Medhi, Tanmoy, Roy, Barnik Saha, Saha, Subhash Chandra(2020). Effect of traverse speed on microstructure and mechanical properties of friction-stir-welded third-generation Al--Li alloy. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 42. (8). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 423. Springer Berlin Heidelberg Berlin/Heidelberg

Kumar, S., Acharya, U., Sethi, D., Medhi, T., Roy, B.S., Saha, S.C.(2020). Effect of traverse speed on microstructure and mechanical properties of friction-stir-welded third-generation Al–Li alloy . Journal of the Brazilian Society of Mechanical Sciences and Engineering. 42. (8).

Kumar, Sudhir, Roy, Barnik Saha(2020). Friction stir welding of glass filled nylon 6 composites. Materials today: proceedings. 24. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 754--762. Elsevier

Surendra Kumar Patel, Nateriya, R., Roy, B.S., Kuriachen, B.(2020). Microstructural and Mechanical Behaviour of WC Reinforced Particles A3003 Surface Composite Fabricated through Friction Stir Processing . Protection of Metals and Physical Chemistry of Surfaces. 56. (5). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 998-1007.

Patel, Surendra Kumar, Nateriya, Raman, Roy, Barnik Saha, Kuriachen, Basil(2020). Microstructural and mechanical behaviour of WC reinforced particles A3003 surface composite fabricated through friction stir processing. Protection of Metals and Physical Chemistry of Surfaces. 56. (5). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 998--1007. Pleiades Publishing Moscow

Choudhury, Smrity, Medhi, Tanmoy, Sethi, Durjyodhan, Kumar, Sanjeev, Roy, Barnik Saha, Saha, SC(2020). Temperature distribution and residual stress in Friction Stir Welding process. Materials Today: Proceedings. 26. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 2296--2301. Elsevier

Acharya, Uttam, Saha, SC, Roy, Barnik Saha, others(2020). Microstructure and mechanical property of friction stir welded Al-Mg joints by adopting modified joint configuration technique. Materials Today: Proceedings. 26. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 2083--2088. Elsevier

Sethi, Durjyodhan, Kumar, Sanjeev, Choudhury, Smrity, Shekhar, Shashank, Roy, Barnik Saha(2020). Synthesis and characterization of AA7075/TiB2 aluminum matrix composite formed through stir casting method. Materials Today: Proceedings. 26. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 1908--1913. Elsevier

Patel, Surendra Kumar, Singh, Virendra Pratap, Roy, Barnik Saha, Kuriachen, Basil(2020). Recent research progresses in Al-7075 based in-situ surface composite fabrication through friction stir processing: A review. Materials Science and Engineering: B. 262. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 114708. Elsevier

Patel, S.K., Singh, V.P., Roy, B.S., Kuriachen, B.(2020). Recent research progresses in Al-7075 based in-situ surface composite fabrication through friction stir processing: A review . Materials Science and Engineering B: Solid-State Materials for Advanced Technology. 262.

Medhi, T., Hussain, S.A.I., Saha Roy, B., Saha, S.C.(2020). Selection of best process parameters for friction stir welded dissimilar Al-Cu alloy: a novel MCDM amalgamated MORSM approach . Journal of the Brazilian Society of Mechanical Sciences and Engineering. 42. (10).

Acharya, U., Roy, B.S., Saha, S.C.(2020). Effect of tool rotational speed on the particle distribution in friction stir welding of AA6092/17.5 SiC<inf>p</inf>-T6 composite plates and its consequences on the mechanical property of the joint . Defence Technology. 16. (2). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 381-391.

Acharya, Uttam, Roy, Barnik Saha, Saha, Subhash Chandra(2020). Effect of tool rotational speed on the particle distribution in friction stir welding of AA6092/17.5 SiCp-T6 composite plates and its consequences on the mechanical property of the joint. Defence Technology. 16. (2). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 381--391. Elsevier

Medhi, Tanmoy, Hussain, Syed Abou Iltaf, Saha Roy, Barnik, Saha, Subhash Chandra(2020). Selection of best process parameters for friction stir welded dissimilar Al-Cu alloy: a novel MCDM amalgamated MORSM approach. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 42. (10). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 546. Springer Berlin Heidelberg Berlin/Heidelberg

Kumar, Sudhir, Roy, Barnik Saha(2020). Tribological properties of acrylonitrile butadiene styrene in self--mated contacts and against steel disc. Materials Today: Proceedings. 26. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 2388--2394. Elsevier

RajanaVenkatesh , Durjyodhan Sethi , Vamsikrishna Kolli, Barnik Saha Roy(2019). Experimental investigation of Aluminium Matrix Composite production and joining. Materials Today: Proceedings. 18. (7). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 5276--5285.

Saju, T.P., Narayanan, R.G., Roy, B.S.(2019). Effect of pinless tool shoulder diameter on dieless friction stir extrusion joining of AA 5052-H32 and AA 6061-T6 aluminum alloy sheets . Journal of Mechanical Science and Technology. 33. (8). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 3981-3997.

Saju, Tinu P, Narayanan, R Ganesh, Roy, Barnik Saha(2019). Effect of pinless tool shoulder diameter on dieless friction stir extrusion joining of AA 5052-H32 and AA 6061-T6 aluminum alloy sheets. Journal of Mechanical Science and Technology. 33. (8). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 3981--3997. Springer

Kumar, S., Roy, B.S.(2019). Novel study of joining of acrylonitrile butadiene styrene and polycarbonate plate by using friction stir welding with double-step shoulder . Journal of Manufacturing Processes. 45. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 322-330.

Tinu P. Saju, R. Ganesh Narayanan, Barnik Saha Roy(2019). Effect of pinless tool shoulder diameter on dieless friction stir extrusion joining of AA 5052-H32 and AA 6061-T6 aluminum alloy sheets. Journal of Mechanical Science and Technology. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 1--17. Korean Society of Mechanical Engineers

Chatterjee, Soumesh, Saha Roy, Biman Kumar, Das, Dhrubajyoti(2019). A novel approach to detect balanced faults during power swing. International Journal of Computational Intelligence & IoT. 2. (1).

Medhi, Tanmoy, Yadava, Manasij Kumar, Roy, Barnik Saha, Saha, Subhash Chandra(2019). An experimental investigation on implications of traverse speed in joining of dissimilar Al--Cu by friction stir welding. The International Journal of Advanced Manufacturing Technology. 104. (1). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 1461--1471. Springer London London

Medhi, T., Yadava, M.K., Roy, B.S., Saha, S.C.(2019). An experimental investigation on implications of traverse speed in joining of dissimilar Al–Cu by friction stir welding . International Journal of Advanced Manufacturing Technology. 104. (1-4). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 1461-1471.

Chatterjee, Soumesh, Roy, Biman Kumar Saha(2019). Fast identification of symmetrical or asymmetrical faults during power swings with dual use line relays. CSEE journal of power and energy systems. 6. (1). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 184--192. CSEE

Kumar, Sudhir, Roy, Barnik Saha(2019). Novel study of joining of acrylonitrile butadiene styrene and polycarbonate plate by using friction stir welding with double-step shoulder. Journal of Manufacturing Processes. 45. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 322--330. Elsevier

UttamAcharya, Barnik SahaRoy, Subhash ChandraSaha(2019). Torque and force perspectives on particle size and its effect on mechanical property of friction stir welded AA6092/17.5SiCp-T6 composite joints. Journal of Manufacturing Processes. 38. (2019 — Volumes 37-38). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 113--121. Elsevier

Acharya, U., Roy, B.S., Saha, S.C.(2019). Torque and force perspectives on particle size and its effect on mechanical property of friction stir welded AA6092/17.5SiC <inf>p</inf> -T6 composite joints . Journal of Manufacturing Processes. 38. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 113-121.

Medhi, T., Roy, B.S., Saha, S.C.(2018). A comprehensive review of microstructure evolution during friction stir welding of aluminium to copper . International Journal of Materials and Product Technology. 57. (1-3). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 1-19.

Tanmoy Medhi, Barnik Saha Roy, Subhash Chandra Saha(2018). A comprehensive review of microstructure evolution during friction stir welding of aluminium to copper. International Journal of Materials and Product Technology 2018. 57. (1/2/3). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 1--19. Inderscience Publishers

R.K., B.M., Maji, P., Samadhiya, A., Ghosh, S.K., Roy, B.S., Das, A.K., Saha, S.C.(2018). A study on induction welding of mild steel and copper with flux under applied load condition . Journal of Manufacturing Processes. 34. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 435-441.

RK, Bhogendro Meitei, Maji, Pabitra, Samadhiya, Ashutosh, Ghosh, Subrata Kumar, Roy, Barnik Saha, Das, Alok Kumar, Saha, Subhash Chandra(2018). A study on induction welding of mild steel and copper with flux under applied load condition. Journal of Manufacturing Processes. 34. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 435--441. Elsevier

Banik, A., Saha Roy, B., Deb Barma, J., Saha, S.C.(2018). An experimental investigation of torque and force generation for varying tool tilt angles and their effects on microstructure and mechanical properties: Friction stir welding of AA 6061-T6 . Journal of Manufacturing Processes. 31. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 395-404.

Acharya, Uttam, Roy, Barnik Saha, Saha, Subash Chandra(2018). A study of tool wear and its effect on the mechanical properties of friction stir welded AA6092/17.5 Sicp composite material joint. Materials Today: Proceedings. 5. (9). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 20371--20379. Elsevier

Banik, Abhijit, Roy, Barnik Saha, Barma, John Deb, Saha, Subhash C(2018). An experimental investigation of torque and force generation for varying tool tilt angles and their effects on microstructure and mechanical properties: Friction stir welding of AA 6061-T6. Journal of Manufacturing Processes. 31. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 395--404. Elsevier

Barman, Subhradeep, Roy, Biman Kumar Saha(2018). Detection and location of faults in large transmission networks using minimum number of phasor measurement units. IET Generation, Transmission & Distribution. 12. (8). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 1941--1950. Wiley Online Library

Saha, Debasree, Datta, Asim, Saha Roy, Biman Kumar, Das, Priyanath(2016). A comparative study on the computation of directional overcurrent relay coordination in power systems using PSO and TLBO based optimization. Engineering Computations. 33. (2). Emerald Group Publishing Limited

Roy, B Saha, Medhi, T, Saha, SC(2015). Material flow modeling in friction stir welding of AA6061-T6 alloy and study of the effect of process parameters. International Journal of Environmental, Chemical, Ecological, Geological and Geophysical Engineering. 9. (6). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 658--666.

Medhi, Tanmoy, Roy, Barnik Saha, Debbarma, Subodh, Saha, SC(2015). Thermal modelling and effect of process parameters in friction stir welding. Materials Today: Proceedings. 2. (4-5). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 3178--3187. Elsevier

Sheheli, S, Roy, B(2014). Constraints and opportunities of raw jute production: a household level analysis in Bangladesh. Progressive Agriculture. 25. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 38--46.

Saha Roy, Barnik, Chaudhuri, Arnab Samaddar, Saha, Subhash Chandra(2013). On the issues of asymmetry observed in heat transfer & material flow in friction stir welding. Advanced Materials Research. 622. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 289--293. Trans Tech Publications Ltd

Roy, Barnik Saha, Saha, Subhash Chandra, Deb Barma, John(2012). 3-D modeling & numerical simulation of friction stir welding process. Advanced Materials Research. 488. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 1189--1193. Trans Tech Publications Ltd

Roy, BK Saha, Sinha, AK, Pradhan, AK(2012). An optimal PMU placement technique for power system observability. International Journal of Electrical Power & Energy Systems. 42. (1). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 71--77. Elsevier

Deb Barma, John, Roy, Joydeep, Saha, SC, Roy, B Saha(2012). Process parametric optimization of submerged arc welding by using utility based Taguchi concept. Advanced Materials Research. 488. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 1194--1198. Trans Tech Publications Ltd

Roy, B., Das, S.(2011). Magnetic and electrical transport properties of La_0.5A _0.5CoO₃ nanoparticles (A = Sr, Ca, and Ba) . Journal of Alloys and Compounds. 509. (18). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 5537-5544.

Lalchhandama, Kholhring, Roy, Bishnupada, Dutta, Biman(2008). Effects of Millettia pachycarpa on the trace metals and tegumental enzymes of Raillietina echinobothrida. Pharmacognosy Magazine. 4. (16). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 254. Sage Publications Ltd.

Roy, B., Das, S.(2008). Magnetic cluster glass behavior and grain boundary effect in Nd0.7 Ba0.3 MnO3 nanoparticles . Journal of Applied Physics. 104. (10).

Roy, B., Poddar, A., Das, S.(2006). Electrical transport properties and magnetic cluster glass behavior of Nd_0.7Sr_0.3MnO₃ nanoparticles . Journal of Applied Physics. 100. (10).

Das, S., Poddar, A., Roy, B.(2004). Band filling dependence of the electrical transport of Nd _1-xA_xTiO₃ ( A = Ca , Sr and Ba) . Journal of Alloys and Compounds. 375. (1-2). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 15-23.

Das, S., Poddar, A., Roy, B., Giri, S.(2004). Studies of transport and magnetic properties of Ce-doped LaMnO ₃ . Journal of Alloys and Compounds. 365. (1-2). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 94-101.

Roy, B., Poddar, A., Das, S., Gmelin, E.(2001). Transport and magnetic properties of bulk and epitaxial thin film of Pr_0.5Sr_0.5MnO₃ . Journal of Alloys and Compounds. 326. (1-2). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 317-320.

Medhi, Tanmoy, Patel Ashwin, R, Roy, Barnik Saha, Saha, SCExperimental Evaluation and Numerical Analysis of Temperature Distribution during Friction Stir Welding.

OTHER

Acharya, Uttam, Choudhury, Smrity, Akinlabi, Esther, Roy, Barnik Saha(2024). Enhancing Joint Performance in Friction Stir Welding through Tailored Double-Butt-Lap Geometry. Welding in the World. (https://doi.org/10.1007/s40194-024-01737). Springerlink

CONFERENCE PAPER

Kumar, S., Jafrey Daniel, J.D., Roy, B.S.(2021). Friction stir welding of glass filled Nylon 6 composite sheets using double step shoulder tool . Materials Today: Proceedings. 44. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 2511-2516.

Das, Rahul, Sethi, Duryodhan, Saha Roy, Barnik(2021). Microstructure and mechanical characteristics of an in-situ synthesis of AA7075/TiB2 metal matrix composite. E3S Web of Conferences. 309. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 01149.

Kumar, S., Jafrey Daniel James, D., Panneerselvam, K., Saha Roy, B.(2021). Tribological studies of glass filled Nylon 6 composites in self-mated contacts and against AISI D2 steel disc . Materials Today: Proceedings. 44. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 1939-1943.

Kumar, S., Saha Roy, B.(2020). Friction Stir Welding of Glass Filled Nylon 6 Composites . Materials Today: Proceedings. 24. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 754-762.

Kumar, S., Sethi, D., Choudhury, S., Roy, B.S., Saha, S.C.(2019). An experimental investigation to the influence of traverse speed on microstructure and mechanical properties of friction stir welded AA2050-T84 Al-Cu-Li alloy plates . Materials Today: Proceedings. 26. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 2062-2068.

Sethi, D., Acharya, U., Medhi, T., Shekhar, S., Roy, B.S.(2019). Microstructural and mechanical property of friction stir welded Al7075/TiB₂aluminium matrix composite . Materials Today: Proceedings. 46. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 9180-9186.

Kumar, D., Ottarackal, D.J., Acharya, U., Medhi, T., Saha Roy, B., Saha, S.C.(2019). A parametric study of friction stir welded AA6061/SiC AMC and its effect on microstructure and mechanical properties . Materials Today: Proceedings. 46. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 9378-9386.

Kumar, U., Acharya, U., Saha, S.C., Roy, B.S.(2019). Microstructure and mechanical property of friction stir welded Al-Mg joints by adopting modified joint configuration technique . Materials Today: Proceedings. 26. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 2083-2088.

Venkatesh, R., Sethi, D., Kolli, V., Roy, B.S.(2019). Experimental investigation of Aluminium matrix composite production and joining . Materials Today: Proceedings. 18. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 5276-5285.

Choudhury, T., Ghorai, A., Medhi, T., Acharya, U., Roy, B.S., Saha, S.C.(2019). Study of microstructure and mechanical properties in friction stir welded aluminum copper lap joint . Materials Today: Proceedings. 46. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 9474-9479.

Choudhury, S., Medhi, T., Sethi, D., Kumar, S., Roy, B.S., Saha, S.C.(2019). Temperature distribution and residual stress in Friction Stir Welding process . Materials Today: Proceedings. 26. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 2296-2301.

Sethi, D., Kumar, S., Choudhury, S., Shekhar, S., Roy, B.S.(2019). Synthesis and characterization of AA7075/TiB<inf>2</inf> aluminum matrix composite formed through stir casting method . Materials Today: Proceedings. 26. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 1908-1913.

Kumar, S., Roy, B.S.(2019). Tribological properties of acrylonitrile butadiene styrene in self-mated contacts and against steel disc . Materials Today: Proceedings. 26. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 2388-2394.

Kumar, U., Prajapati, A., Acharya, U., Medhi, T., Saha Roy, B., Saha, S.C.(2019). Welding condition &amp; microstructure of friction stir welded AA 6061-T6 and AZ31B . Materials Today: Proceedings. 46. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 9484-9489.

Kumar, S., Roy, B.S.(2019). A comparative analysis between conventional tool and double-step shoulder tool for joining of acrylonitrile butadiene styrene and polycarbonate plate by using friction stir welding . Materials Today: Proceedings. 26. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 2212-2215.

Acharya, U., Saha Roy, B., Chandra Saha, S.(2018). A Study of Tool Wear and its Effect on the Mechanical Properties of Friction Stir Welded AA6092/17.5 Sicp Composite Material Joint . Materials Today: Proceedings. 5. (9). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 20371-20379.

Debbarma, S, Das, Biplab, Roy, B(2018). Experimental investigation of engine performance of Neem-Karanja mixed biodiesel blend in a CI engine. AIP conference proceedings. 1998. (1). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 020002.

KrishnaPada Sinha,Tanmoy Medhi, Barnik Saha Roy, Subhash Chandra Saha(2017). On the Issues of Surface Strain in Friction Stir Welding of AA6061-T6. Proceedings of the International Conference on Recent Innovations in Production Engineering. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 185--186.

Sinha. K., Medhi.T.,Saha Roy.B., Saha.S.C(2016). Experimental study of surface strain during friction stir welding. 10th International Conference on Trends in Welding Research& 9th International Welding Symposium of Japan Welding Society (JWS).

Saha, Debasree, Datta, Asim, Roy, Biman Kumar Saha, Das, Priyanath(2016). Optimal coordination of DOCR in interconnected power systems. 2016 2nd International Conference on Control, Instrumentation, Energy & Communication (CIEC). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 230--234.

Medhi, T., Roy, B.S., Debbarma, S., Saha, S.C.(2015). Thermal modelling and effect of process parameters in friction stir welding . Materials Today: Proceedings. 2. (4-5). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 3178-3187.

Roy. Abhinava., Das. Pankaj Kr., Saha Roy. Barnik., Chakraborti. Prasun(2014). Tribological Study of Cylinder Liner-Ring Combination Using Degraded Engine Oil. International Conference On Advances In Tribology. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 131--134.

Roy, B., Das, S.(2012). Doping effects of Cr in cluster glass La_0.5Sr _0.5CoO₃ . AIP Conference Proceedings. 1447. (1). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 1101-1102.

Roy, B., Das, S.(2008). The structural, electrical and magnetic properties of La _0.5Sr_0.5CoO₃ nanoparticles . AIP Conference Proceedings. 1003. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 61-63.

Saha, S, Roy, B, Siddhanta, SK, Sinha, TP(2000). Hydrogen bonding in conducting polymer: an ultrasonic study. INDIAN JOURNAL OF PHYSICS AND PROCEEDINGS OF THE INDIAN ASSOCIATION FOR THE CULTIVATION OF SCIENCE A. 74. (4). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 379--381.

BOOK CHAPTER

Sudhir Kumar, Tanmoy Medhi, Barnik Saha Roy(2019). Friction Stir Welding of Thermoplastic Composites. Advances in Industrial and Production Engineering. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString pp--221. Springer, Singapore

Kumar, Sudhir, Roy, Barnik Saha, Panneerselvam, K(2019). Tribological Behaviour of Nylon 6 Composites and Optimization of Process Parameters Using Hybrid Taguchi-GRA and CSA. Advances in Computational Methods in Manufacturing: Select Papers from ICCMM 2019. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 719--731. Springer Singapore Singapore

BOOK

Kumar, S., Medhi, T., Roy, B.S.(2019). Friction stir welding of thermoplastic composites . Lecture Notes in Mechanical Engineering. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 221-235.

Roy, B., Chaudhuri, A., Saha, S.C.(2013). On the issues of asymmetry observed in heat transfer and material flow in friction stir welding . Advanced Materials Research. 622. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 289-293.

Roy, B.S., Saha, S.C., DebBarma, J.(2012). 3-D modeling &amp; numerical simulation of Friction Stir welding process . Advanced Materials Research. 488-489. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 1189-1193.

Deb Barma, J., Roy, J., Saha, S.C., Roy, B.S.(2012). Process parametric optimization of submerged arc welding by using utility based Taguchi concept . Advanced Materials Research. 488-489. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 1194-1198.