Profile Details

Create Project

★★★★★

☆☆☆☆☆

★★★★★

☆☆☆☆☆

Hire Dr. Mazlee M.

Malaysia

Freelance materials engineering & metallurgy consultants, digital academic visibility, research & bibliometrics mapping

Profile Summary

Mazlee Mohd Noor is an Associate Professor at the Faculty of Mechanical Engineering Technology, Universiti Malaysia Perlis (UniMAP). He also an Associate Research Fellow at the Centre of Excellence for Frontier Materials Research. He teaches Computer Aided Analysis, Computer Aided Design (CAD) and Welding Graphics, Non-Conventional Welding Processes, Physical Metallurgy, Metallurgical Design, Welding Metallurgy, Engineering Alloys, Non-Destructive Test and Materials Selection and Design, Phase Transformation, Strength of Materials and Engineering Materials. Previously, he has carried out numbers of engineering testing and consultancy services to various public authorities and private industries. Besides, he also carried out numbers of hand-on workshops and services related to digital academic visibility, research mapping and bibliometrics mapping.

Subject Matter Expertise

• ★ Materials Science & Engineering
• ★ Metallurgy
• ★ Research Methodology
• ☆ Data Analysis
• ☆ Book Reviews

Services

• Research
• Consulting
• Data & AI
• Product Development

Research Market Research, Gap Analysis, Gray Literature Search, Systematic Literature Review

Consulting Scientific and Technical Consulting

Data & AI Statistical Analysis, Data Visualization

Product Development Formulation

Work Experience

Associate Professor

Universiti Malaysia Perlis

September 2020 - Present

Lecturer, Senior Lecturer & Assoc. Prof.

Universiti Malaysia Perlis

2003 - September 2020

Lecturer

Universiti Teknologi MARA

2000 - 2003

Education

M.Sc (Materials Engineering) (School of Materials Engieering)

Universiti Sains Malaysia

1999 - 2010

PhD (Materials Engineering) (School of Materials Engineering)

Universiti Malaysia Perlis

2006 - 2009

Degree in Materials Engineering (School of Materials Engineering)

Universiti Sains Malaysia

1995 - 1998

Diploma in Civil Engineering (Faculty of Civil Engineering)

Universiti Teknologi Malaysia

1991 - 1994

Certifications

• Certification details not provided.

Publications

CONFERENCE PAPER

Hamzah, K.A., Keat, Y.C., Leng, T.P., Noor, M.M., Sazali, S.A., Yun, A.Y.(2019). Tensile strength and hardness property of ABS filled CuO prepared via 3D printing approach . Materials Today: Proceedings. 16. p. 1778-1781.

Atikah, N., Afendi, M., Shahriman, A.B., Zunaidi, I., Razlan, Z.M., Wan, W.K., Mazlee, M.N., Majid, M.S.A.(2018). Investigation of Adhesive Joint Strength for Dissimilar Metal Adherends by Using Taguchi Method . IOP Conference Series: Materials Science and Engineering. 429. (1).

Mukhtaruddin, A., Isa, M., Noor, M.M., Adzman, M.R., Ain, M.F.(2018). Review of UHF detection of partial discharge experimentation in oil-filled power transformer: Objectives, methodologies and results . AIP Conference Proceedings. 2013.

Syafiq, W.M., Afendi, M., Daud, R., Mazlee, M.N., Abdul Majid, M.S., Lee, Y.S.(2017). Mechanical properties of friction stir welded butt joint of steel/aluminium alloys: Effect of tool geometry . Journal of Physics: Conference Series. 908. (1).

Nadzri, N.I.M., Jamaludin, S.B., Mazlee, M.N., Jamal, Z.A.Z.(2016). Optimization of fly ash as sand replacement materials (SRM) in cement composites containing coconut fiber . AIP Conference Proceedings. 1756.

Rushdi, N.M.F.M., Jamaludin, S.B., Mazlee, M.N., Jamal, Z.A.Z.(2016). Correlation between porosity and space holder content at different sintering temperatures of aluminum foam . AIP Conference Proceedings. 1756.

Mazlee, M.N.(2016). Sustainable catalyst supports for carbon dioxide gas adsorbent . AIP Conference Proceedings. 1756.

Yasmin, Y., Mazlee, M.N., Norzilah, A.H., Shamsul, J.B., Azmi, R., Chan, W.H.(2016). The investigation of physical and mechanical properties of porous anorthite ceramics using statistical analysis . AIP Conference Proceedings. 1756.

Hanif, W.Y.W., Risby, M.S., Noor, M.M.(2015). Influence of Carbon Nanotube Inclusion on the Fracture Toughness and Ballistic Resistance of Twaron/Epoxy Composite Panels . Procedia Engineering. 114. p. 118-123.

Mazlee, M.N., Shamsul, J.B., Zamri, Y.(2012). Fabrication and dynamic mechanical properties of A357-stainless steel composites . 8th Asian-Australasian Conference on Composite Materials 2012, ACCM 2012 - Composites: Enabling Tomorrow's Industry Today. 1. p. 179-184.

Nadzri, N.I.M., Jamaludin, S.B., Noor, M.M.(2012). Development and properties of composite cement reinforced coconut fiber with the addition of fly ash . 8th Asian-Australasian Conference on Composite Materials 2012, ACCM 2012 - Composites: Enabling Tomorrow's Industry Today. 1. p. 296-301.

Rahman, W., Shamsul, J.B., Mazlee, M.N.(2012). Characterization and optimization of compaction pressure in the alumina (Al<inf>2</inf>0<inf>3</inf>) reinforced iron-chromium (Fe-Cr) composite under microwave sintering process . 8th Asian-Australasian Conference on Composite Materials 2012, ACCM 2012 - Composites: Enabling Tomorrow's Industry Today. 1. p. 621-627.

Yusoff, Z., Jamaludin, S.B., Noor, M.M.(2012). Physical properties and microstructure of green aluminium matrix composite . 8th Asian-Australasian Conference on Composite Materials 2012, ACCM 2012 - Composites: Enabling Tomorrow's Industry Today. 1. p. 569-574.

Abdullah, A., Jamaludin, S.B., Anwar, M.I., Noor, M.M., Hussin, K.(2011). Assessment of physical and mechanical properties of cement panel influenced by treated and untreated coconut fiber addition . Physics Procedia. 22. p. 263-269.

JOURNAL ARTICLE

Hamzah, K.A., Yeoh, C.K., Noor, M.M., Teh, P.L., Aw, Y.Y., Sazali, S.A., Wan Ibrahim, W.M.A.(2019). Mechanical properties and thermal and electrical conductivity of 3D printed ABS-copper ferrite composites via 3D printing technique . Journal of Thermoplastic Composite Materials.

Azharudin Mukhtaruddin, Muzamir Isa, Mazlee Mohd Noor, Mohd Rafi Adzman, Baharuddin Ismail, M. N. K. H. Rohani, Mohd Fadzil Ain(2018). SIMULATION ON THE CONDITIONS AFFECTING PARTIAL DISCHARGE INITIATION IN MICROBUBBLE IMMERSED IN DIELECTRIC LIQUID . Jurnal Teknologi. 80. (6). Penerbit {UTM} Press

Ahmad, M.A.A., Abdul Majid, M.S., Ridzuan, M.J.M., Mazlee, M.N., Gibson, A.G.(2018). Dynamic mechanical analysis and effects of moisture on mechanical properties of interwoven hemp/polyethylene terephthalate (PET) hybrid composites . Construction and Building Materials. 179. p. 265-276.

Mukhtaruddin, A., Isa, M., Noor, M.M., Adzman, M.R., Ismail, B., Rohani, M.N.K.H., Ain, M.F.(2018). Simulation on the conditions affecting partial discharge initiation in microbubble immersed in dielectric liquid . Jurnal Teknologi. 80. (6). p. 69-75.

W. H. Chan, M. N. Mazlee, Zainal Arifin Ahmad, M. A. M. Ishak, J. B. Shamsul(2017). Effects of fly ash addition on physical properties of porous clay-fly ash composites via polymeric replica technique . Journal of Material Cycles and Waste Management. 19. (2). p. 794--803. Springer Nature

W. H. Chan, M. N. Mazlee, Zainal Arifin Ahmad, M. A. M. Ishak, J. B. Shamsul(2017). The development of low cost adsorbents from clay and waste materials: a review . Journal of Material Cycles and Waste Management. 19. (1). p. 1--14. Springer Nature

Chan, W.H., Mazlee, M.N., Ahmad, Z.A., Ishak, M.A.M., Shamsul, J.B.(2017). Effects of fly ash addition on physical properties of porous clay-fly ash composites via polymeric replica technique . Journal of Material Cycles and Waste Management. 19. (2). p. 794-803.

Chan, W.H., Mazlee, M.N., Ahmad, Z.A., Ishak, M.A.M., Shamsul, J.B.(2017). The development of low cost adsorbents from clay and waste materials: a review . Journal of Material Cycles and Waste Management. 19. (1).

Ridzuan, M.J.M., Majid, M.S.A., Afendi, M., Mazlee, M.N., Gibson, A.G.(2016). Thermal behaviour and dynamic mechanical analysis of Pennisetum purpureum/glass-reinforced epoxy hybrid composites . Composite Structures. 152. p. 850-859.

Nurul Atikah, Mohd Afendi, Nurul Amira, Mohd Noor Mazlee(2015). Influence of Heat Treatment and Surface Roughing to the Adherent Surface and Adhesion Strength: A Review . AMM. 786. p. 68--73. Trans Tech Publications

Shamsudin, S.R., Harun, M., Yazid, H., Noor, M.M., Salleh, M.A.A.M., Rahmat, A.(2015). The root caused analysis of leakaged heat exchanger tube,Ursachenanalyse einer Leckage an einem Wärmeüberträgerrohr . Praktische Metallographie/Practical Metallography. 52. (3). p. 157-176.

Nurul Atikah, Mohd Afendi, Siti Hirmaliza, Mohd Shukry Abdul Majid, Nurul Amira, Mohd Noor Mazlee(2014). Strength of Ductile Adhesive Butt Joint Bonded with Dissimilar Adherents: Effect of Surface Roughness . AMM. 554. p. 366--370. Trans Tech Publications

Mohd Noor Mazlee, Alvin Tan Yin Zhen, Shamsul Baharin Jamaludin, Nur Farhana Hayazi, Shaiful Rizam Shamsudin(2013). Joining of Dissimilar 6063 Aluminium Alloy – 316L Stainless Steel by Spot Welding: Tensile Shear Strength and Heat Treatment . AMR. 795. p. 492--495. Trans Tech Publications

Roshasmawi Abdul Wahab, Mohd Noor Mazlee, Shamsul Baharin Jamaludin, Khairul Nizar Ismail(2013). Effects of Fly Ash Addition on Compressive Strength and Flexural Strength of Foamed Cement Composites . AMR. 795. p. 664--668. Trans Tech Publications

Madzura Mohamad, Mohd Noor Mazlee, Shamsul Baharin Jamaludin(2013). Sand Replacement Materials (SRM) in Sustainable Cement Composites; A Concise Review . AMR. 795. p. 91--95. Trans Tech Publications

Chan Wai Hoong, Mohd Noor Mazlee, Zainal Arifin Ahmad, Shamsul Baharin Jamaludin, Mohd Azlan Mohd Ishak, Muhammad Shahar Jusoh(2013). Sustainable Porous Materials for Gas Adsorption Applications; A Concise Review . AMR. 795. p. 96--101. Trans Tech Publications

Mohd Noor Mazlee, Tan Pei Key, Shamsul Baharin Jamaludin, Roshasmawi Abdul Wahab, Nur Izzati Muhd Nadzri, Alida Abdullah(2013). The Effects of Fly Ash and Polystyrene Bead Additions on Compressive Strength of Foamed Cement Composites . AMR. 795. p. 496--499. Trans Tech Publications

Rahman, W., Shamsul, J.B., Mazlee, M.N.(2013). Effect of heating rate on microstructure and properties of the iron-chromium reinforced with alumina particle produced via microwave sintering . International Review of Mechanical Engineering. 7. (1). p. 134-139.

Abdullah, A., Jamaludin, S.B., Noor, M.M., Hussin, K.(2012). Compressive strength and crack propagation of cement composites reinforced coconut fibre . Journal of Engineering and Applied Sciences. 7. (1). p. 108-112.

Muhd Nadzri, N.I., Baharin Jamaludin, S., Mohd Noor, M.(2012). Development and properties of coconut fiber reinforced composite cement with the addition of fly ash . Journal of Sustainable Cement-Based Materials. 1. (4). p. 186-191.

Abdullah, A., Jamaludin, S.B., Noor, M.M., Hussin, K.(2012). Mechanical properties and fracture behaviour of coconut fibre-based green composites,Proprietǎţile mecanice şi comportamentul la rupere al unor compozite cu conţinut de fibre de cocos . Revista Romana de Materiale/ Romanian Journal of Materials. 42. (1). p. 23-29.

Abdullah, A., Jamaludin, S.B., Noor, M.M., Hussin, K.(2011). Composite cement reinforced coconut fiber: Physical and mechanical properties and fracture behavior . Australian Journal of Basic and Applied Sciences. 5. (7). p. 1228-1240.

Mazlee, M.N., Shamsul, J.B., Kamarudin, H.(2010). Comparison of dynamic mechanical properties of non-superheated and superheated A357 alloys . Kovove Materialy. 48. (3). p. 185-190.

Mazlee, M.N. and Shamsul, J.B. and Kamarudin, H.(2010). Comparison of dynamic mechanical properties of non-superheated and superheated A357 alloys . Kovove Materialy. 48. (3). p. 185-190.

Mazlee, M.N., Shamsul, J.B., Kamarudin, H., Rizam, S.S.(2009). Microstructural study and differential scanning alorimetry analysis at elevated temperatures of uperheated AS-CAST A357 alloy . International Journal of Mechanical and Materials Engineering. 4. (2). p. 181-185.

Noor, Mazlee Mohd and Jamaludin, Shamsul Baharin and Hussin, Kamarudin and Shamsudin, Shaiful Rizam and Ismail, K and Abdullah, MF(2008). Microstructural study and differential scanning Calorimetry analysis at elevated tempatures of superhead As-Cast A357 alloy. Universiti Kebangsaan Malaysia (UKM)

Noor, M.Mohd., Jamaludin, S.B., Hussin, K.(2008). Microstructural study of Al-Si-Mg alloy reinforced with stainless steel wires composite via casting technique . American Journal of Applied Sciences. 5. (6). p. 721-725.

Ahmad, Khairel Rafezi and Lee, Wong Jing and Zaki, Ruhiyuddin Mohd and Noor, Mazlee Mohd and Wahid, Mohd Fitri Mohamad and Shamsudin, Shaiful Rizam and Jamaludin, Shamsul Baharin and others(2007). The Microstructure and Properties of Aluminium Composite Reinforced with 65 μm Alumina Particles via Powder Metallurgy. Universiti Malaysia Perlis (UniMAP)

Arshad, Mohd Fadzil and Johari, Megat and Azmi, Megat and Sidek, Mohd and Norhasri, Muhd and Mohd Noor, Mazlee(2007). Kajian penghasilan simen campuran berbilang mineral dari sumber tempatan untuk digunakan dalam bancuhan konkrit. Institute of Research, Development and Commercialization, Universiti Teknologi MARA

Noor, Mazlee Mohd and Jamaludin, Shamsul Baharin(2004). Bahan NANO dan aplikasinya. Kolej Universiti Kejuruteraan Utara Malaysia

Arshad, Mohd Fadzil and Johari, Megat and Azmi, Megat and Mohd Noor, Mazlee and Kamal, Md Lias(2004). Metakaolin: penghasilan dan kesan penggunaannya sebagai bahan gantian separa terhadap sifat-sifat konkrit. Institute of Research, Development and Commercialization, Universiti Teknologi MARA

Noor, Mazlee Mohd and Jamaludin, Shamsul Baharin(2004). Microstructure, Properties and Fracture Mechanism of Al 2014 Reinforced with Alumina Particles. Kolej Universiti Kejuruteraan Utara Malaysia

Jamaludin, Shamsul Baharin and Ming, Ooi Woei and Noor, Mazlee Mohd and Rafizi, KhairelTHE EFFECT OF THICKNESS ON THE SHEAR STRENGTH OF SPOT WELDED AUSTENITIC STAINLESS STEEL.

Noor, Mazlee Mohd and Jamaludin, Shamsul Baharin and Shamsuddin, Shaiful Rizam and Bukhari, Mohabattul Zaman SNS and Ahmad, Khairel Rafezi and Othman, RaudhahTHE EFFECTS OF SOLUTIONIZING TEMPERATURES ON MICROSTRUCTURES OF AS-RECEIVED A357 ALLOY.

Jamaludin, Shamsul Baharin and Ming, Ooi Woei and Noor, Mazlee Mohd and Rafizi, KhairelTHE EFFECTS OF WELDING CURRENT AND WELDING DURATION ON THE SHEAR STRENGTH OF SPOT WELDED AUSTENITIC STAINLESS STEEL.

BOOK

Wan Sulong, W.M.S., Rojan, M.A., Mazlee, M.N.(2018). Tensile and hardness analysis of dissimilar friction stir welding between AA6061 with AA5083 and mild steel . Advanced Structured Materials. 85. p. 335-344.

Wan Sulong, W.M.S., Rojan, M.A., Mazlee, M.N.(2018). Influence of tool plunge depth on the joint strength and hardness of friction stir welded AA6061 and mild steel . Advanced Structured Materials. 85. p. 373-383.

Syafiq, W.M., Afendi, M., Daud, R., Mazlee, M.N., Jaafar, N.A.(2017). Variation of tool offsets and its influence on mechanical properties of dissimilar friction stir welding of aluminum alloy 6061 and S235JR mild steel by conventional belting milling machine . Lecture Notes in Mechanical Engineering. p. 37-47.

Yasmin, Y., Mazlee, M.N., Norzilah, A.H., Shamsul, J.B., Azmi, R., Chan, W.H., Jahidi, H.(2016). The development and characterisation of porous clay - Precipitated calcium carbonate . Key Engineering Materials. 694. p. 189-194.

Rahman, W., Shamsul, J.B., Mazlee, M.N.(2016). Optimization of holding time on microwave irradiation of the composite iron-chromium reinforced with alumina particle . Key Engineering Materials. 673. p. 107-115.

Madzura, M., Mazlee, M.N., Shamsul, J.B.(2015). Effects of quarry dust as partial sand replacement on compressive strength and crack profile of cement composites . Materials Science Forum. 819. p. 399-404.

Mazlee, M.N. and Shamsul, J.B. and Yasmin, Y. and Shamsudin, S.R. and Risby, M.S. and Afendi, M.(2015). The effects of rolling deformation and annealing treatment on damping capacity of 1200 aluminium alloy . Materials Science Forum. 819. p. 20-24.

Mazlee, M.N., Shamsul, J.B., Yasmin, Y., Shamsudin, S.R., Risby, M.S., Afendi, M.(2015). The effects of rolling deformation and annealing treatment on damping capacity of 1200 aluminium alloy . Materials Science Forum. 819. p. 20-24.

Shamsudin, S.R., Harun, M., Mazlee, M.N., Azmi, R., Abdul Malek, R.(2015). Failure analysis of crane wire rope . Materials Science Forum. 819. p. 467-472.

Jamaludin, S.B., Abd Latif, M.Z., Mazlee, M.N., Hussin, K.(2015). Joining dissimilar metals between steel and aluminum by TIG welding . Materials Science Forum. 819. p. 45-49.

Jamaludin, S.B., Abdullah, M.H., Mazlee, M.N., Hussin, K.(2015). Effect of solution treatment temperature on tensile strength of Al-Mg-Si alloy . Materials Science Forum. 819. p. 39-44.

Chan, W.H., Mazlee, M.N., Ahmad, Z.A., Shamsul, J.B., Ishak, M.A.M.(2015). The effects of fly ash addition on the properties of porous clay-fly ash composites . Materials Science Forum. 819. p. 123-128.

Atikah, N., Afendi, M., Hirmaliza, S., Abdul Majid, M.S., Amira, N., Mazlee, M.N.(2014). Strength of ductile adhesive butt joint bonded with dissimilar adherents: Effect of surface roughness . Applied Mechanics and Materials. 554. p. 366-370.

Rahman, W., Shamsul, J.B., Mazlee, M.N.(2014). Optimization of sintering temperature on microwave sintering of the composite iron-chromium reinforced with alumina particles . Advanced Materials Research. 879. p. 218-223.

Noor, M.M., Jamaludin, S.B.(2013). The effects of superheating treatment on distribution of eutectic silicon particles in A357-continuous stainless steel composite . Advanced Materials Research. 620. p. 511-516.

Nadzri, N.I.M., Jamaludin, S.B., Mazlee, M.N.(2013). The development of cement composites reinforced coconut fiber with fly ash addition: Mechanical properties and fracture behavior . Advanced Materials Research. 795. p. 128-132.

Shamsudin, S.R., Harun, M., Mohd Salleh, M.A.A., Yazid, H., Mazlee, M.N.(2013). Failure investigation on rusty mesh strainer of petrochemical plant . Advanced Materials Research. 795. p. 488-491.

Noor, M.M. and Jamaludin, S.B.(2013). The effects of superheating treatment on distribution of eutectic silicon particles in A357-continuous stainless steel composite . Advanced Materials Research. 620. p. 511-516.

Noor, M.M., Zhen, A.T.Y., Jamaludin, S.B., Hayazi, N.F., Shamsudin, S.R.(2013). Joining of dissimilar 6063 aluminium alloy-316L stainless steel by spot welding: Tensile shear strength and heat treatment . Advanced Materials Research. 795. p. 492-495.

Hayazi, N.F., Wang, Y., Mazlee, M.N., Chan, S.L.I.(2013). Static X-ray scans on the titanium hydride (TiH2) powder during dehydrogenation . Advanced Materials Research. 795. p. 124-127.

Jamaludin, S.B., Leng, T.W., Zaidi, N.H.A., Daud, Z.C., Mazlee, M.N.(2013). Fabrication and characterization of porous F-75 for potential application in tissue engineering . Advanced Materials Research. 795. p. 78-81.

Hoong, C.W., Mazlee, M.N., Ahmad, Z.A., Jamaludin, S.B., Mohd Ishak, M.A., Jusoh, M.S.(2013). Sustainable porous materials for gas adsorption applications; A concise review . Advanced Materials Research. 795. p. 96-101.

Mohamad, M., Mazlee, M.N., Jamaludin, S.B.(2013). Sand replacement materials (SRM) in sustainable cement composites; A concise review . Advanced Materials Research. 795. p. 91-95.

Mazlee, M.N., Key, T.P., Jamaludin, S.B., Wahab, R.A., Nadzri, N.I.M., Abdullah, A.(2013). The effects of fly ash and polystyrene bead additions on compressive strength of foamed cement composites . Advanced Materials Research. 795. p. 496-499.

Wahab, R.A., Mazlee, M.N., Jamaludin, S.B., Ismail, K.N.(2013). Effects of fly ash addition on compressive strength and flexural strength of foamed cement composites . Advanced Materials Research. 795. p. 664-668.

Jamaludin, S.B., Mazlee, M.N., Kadir, S.K.A., Ahmad, K.R.(2013). Mechanical properties of dissimilar welds between stainless steel and mild steel . Advanced Materials Research. 795. p. 74-77.

Jamaludin, S.B., Mazlee, M.N., Ismail, M.R., Ahmad, K.R., Hussin, K.(2013). Effect of spot welding current and cycles on the mechanical properties of welded galvanized steel sheets . Advanced Materials Research. 795. p. 87-90.

Rahman, W., Shamsul, J.B., Mazlee, M.N.(2012). Microwave sintering of pure iron with addition of stearic acid as binder . Advanced Materials Research. 576. p. 166-169.

OTHER

M. N. Mazlee (2016). The Effects of Superheating Treatment on Distribution of Eutectic Silicon Particles in A357-Continuous Stainless Steel Composite . Figshare.

Shamsul Baharin Jamaludin, Mohd Sobri Idris, Mazlee Mohd Noor(2014). REPORT ON RESEARCH CLUSTER 2005-2014 . Unpublished. Unpublished

Shamsul Baharin Jamaludin, Mazlee Mohd Noor(2012). Report on activities research cluster (sustainable engineering 2012) . Unpublished. Unpublished

M N Mazlee, J B Shamsul(2010). INTERFACIAL REACTION LAYER AND TENSILE SHEAR STRENGTH OF AI 6063 ALLOY/STAINLESS STEEL 316L SPOT WELDED JOINT . Unpublished. Unpublished

Mazlee Mohd Noor, Shamsul Baharin Jamaludin(2009). THE EFFECTS OF SOLUTIONIZING TEMPERATURES ON MICROSTRUCTURES OF AS-RECEIVED A357 ALLOY . Unpublished. Unpublished

S S Rizam, K Azmi, D M Nazree, J B Shamsul, A A Azrem, A M H Firdaus, M N Mazlee, C I Mahdi, A R Daud, S Roslinda(2008). DEVELOPMENT OF A LID SEALED FURNACE FOR THE PRODUCTION OF MAGNESIUM ALLOYS . Unpublished. Unpublished

M N Mazlee, J B Shamsul, K Hussin, S S Rizam, K R Ahmad, M W M Fitri, M Z Ruhiyuddin, M F Abdullah(2007). DAMPING BEHAVIOUR OF AS-RECEIVED AND AS-CAST Al-Si-Mg ALLOYS . Unpublished. Unpublished

S S Rizam, M W M Fitri, M N Mazlee, J B Shamsul(2007). EFFECT OF PARTICLE COATING ON MATRIX-REINFORCEMENT BONDING . Unpublished. Unpublished

M N Mazlee, J B Shamsul, K Hussin, S S Rizam, K Ismail(2007). PRELIMINARY MICROSTRUCTURE AND HARDNESS STUDIES OF A356/STAINLESS STEEL COMPOSITE VIA GRAVITY DIE CASTING TECHNIQUE . Unpublished. Unpublished

S S Rizam, M N Mazlee, J B Shamsul, K R Ahmad(2007). EFFECT OF COLLOIDAL SIO 2 CONTENT ON THE MORPHOLOGY OF COATED CERAMIC PARTICLES . Unpublished. Unpublished

A Z Nur Hidayah, J B Shamsul, A Z Ahmad Mujahid, C M Ruzaidi, M N Mazlee(2006). FRACTURE MECHANISM IN COBALT IMPLANT COMPOSITE . Unpublished. Unpublished

J B Shamsul, H Kamarudin, K Nizar, C M Ruzaidi, K Rafezi, M N Bukhari, D Mazlee, Murizam(2006). METALLURGICAL ENGINEERING IN KOLEJ UNIVERSITI KEJURUTERAAN UTARA MALAYSIA . Unpublished. Unpublished

M N Mazlee, J B Shamsul, K Hussin, S R Shamsudin, M F Abdullah(2006). Phase Evolution of A356 Alloy . Unpublished. Unpublished

S S Rizam, M Harun, Y Hafizal, M N Mazlee, M W M Fitri, J B Shamsul(2006). Fabrication of A356 Al Alloy -SiC p Composites by Stir Casting Method . Unpublished. Unpublished

Mazlee Mohd Noor, Shamsul Baharin Jamaludin(2006). Recycled aluminium composite pulley . Unpublished. Unpublished

Mazlee Mohd Noor, Shamsul Baharin Jamaludin(2005). Enviro composite pulley . Unpublished. Unpublished

BOOK CHAPTER

Atikah, N., Afendi, M., Hirmaliza, S., Majid, M. S. A., Amira, N., Mazlee, M. N.(2014). Strength of Ductile Adhesive Butt Joint Bonded with Dissimilar Adherents: Effect of Surface Roughness . Mechanical and Materials Engineering. 554. p. 366-370.

Rahman, W., Shamsul, J. B., Mazlee, M. N.(2014). Optimization of Sintering Temperature On Microwave Sintering of The Composite Iron-Chromium Reinforced with Alumina Particles . Advanced Materials Conference. 879. p. 218-223.

DISSERTATION THESIS

Noor, Mazlee Mohd(2010). Damping Properties of A357 Alloys and A357-Stainless Composites Fabricated Under Different Conditions.